Matrix Metalloproteinase 8 (MMP8) BioAssay ELISA Kit (Mouse)

£976.00 96 Tests

Matrix Metalloproteinase 8 (MMP8) BioAssay ELISA Kit (Mouse) is a sandwich enzyme immunoassay for in vitro quantitative measurement of MMP8 in mouse serum, plasma and other biological fluids.

SKU: US026756 Categories: , , ,

Additional information

Detection Range





Intra-Assay CV:

Inter-Assay CV:

Kit Components

*026756A: Microtiter Strips, 1×96 wells *026756B: Standard, 2×1 vial
026756C: Standard Diluent, 1x20ml
*026756D: Detection Reagent A (green), 1x120ul
*026756E: Detection Reagent B (red), 1x120ul
026756F: Assay Diluent A, 1x12ml
026756G: Assay Diluent B, 1x12ml
*026756J: Positive Control, 2.02ng/ml, 1×1 vial
026756H: TMB Substrate, 1x9ml
026756K: Stop Solution, 1x6ml
026756L: Wash Buffer, 30X, 1x20ml


The Stop Solution (026756K) included for use in this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Storage and Stability

Store *026756A, *026756B, *026756D, *026756E and *026756J at -20?C. After reconstitution of *026756J, store at 4?C and use within 5 days. Store all the other components at 4?C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

Notes on 026756J

Positive Control

Intended Use

The positive control is from a mouse serum sample known to contain the target protein. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.


The positive control vial contains mouse MMP8 in mouse serum (lyophilized powder). Note: The mouse based serum used in this product are from healthy mice of SPF standard (specific pathogen-free animals).

Expected Values



Dissolve with 150ul standard diluent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20?C. After reconstitution, store Positive Control vial at 4?C and use within 5 days.

Assay Procedure Summary

1. Prepare all reagents, samples and standards.
2. Add 100ul standard or sample to each well. Incubate 2 hours at 37?C.
3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37?C.
4. Aspirate and wash 3 times.
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37?C.
6. Aspirate and wash 5 times.
7. Add 90ul Substrate Solution. Incubate 15-25 minutes at 37?C.
8. Add 50ul Stop Solution. Read at 450nm immediately.

Source Antigen


Shelf Life

6 Months