Luteinizing Hormone (LH) BioAssay ELISA Kit (Rat)

£1,007.00 96 Tests

Luteinizing Hormone (LH) BioAssay ELISA Kit is a competitive inhibition enzyme immunoassay technique for the in vitro quantitative measurement of LH in rat serum, plasma and other biological fluids.

SKU: US026576 Categories: ,

Additional information

Detection Range

98.77-8000pg/ml

Sensitivity

38.25pg/ml

Precision

Intra-Assay CV:
<10%

Inter-Assay CV:
<12%

Kit Components

*026576A: Microtiter Strips, 1×96 wells
*026576B: Standard, 2×1 vial
026576C: Standard Diluent, 1x20ml
*026576D: Detection Reagent A (green), 1x120ul
*026576E: Detection Reagent B (red), 1x120ul
026576F: Assay Diluent A, 1x12ml
026576G: Assay Diluent B, 1x12ml
026576H: TMB Substrate, 1x9ml
*026576J: Positive Control, 1x1vial, 680pg/ml (Lyophilized)
026576K: Stop Solution, 1x6ml
026576L: Wash Buffer, 30X, 1x20ml

Precaution

The Stop Solution (026576K) suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Storage and Stability

Store *026576A, *026576B, *026576D, *026576E and *026576J at -20?C. After reconstitution of *026576J, store at 4?C and use within 5 days. Store all the other components at 4?C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

Notes on 026576J

Positive Control

Intended Use

The Positive Control is from is from a rat serum sample known to contain the target protein. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.

Characteristics

The positive control vial contains rat LH in rat serum (lyophilized powder). Note: The rat source material used in this product are from healthy animal of SPF standard (specific pathogen-free animals).

Expected Values

680pg/ml

Usage

Dissolve with 150ul standard dilutent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 50ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20?C. After reconstitution, store Positive Control vial at 4?C and use within 5 days.

Assay Procedure Summary

1. Prepare all reagents, samples and standards.
2. Add 50ul standard or sample to each well.
3. Add 50ul prepared Detection Reagent A immediately. Shake and mix. Incubate 1 hour at 37?C.
4. Aspirate and wash 3 times.
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37?C.
6. Aspirate and wash 5 times.
7. Add 90ul Substrate Solution. Incubate 10-20 minutes at 37?C.
8. Add 50ul Stop Solution. Read at 450nm immediately.

Shelf Life

6 Months