Aspartate Aminotransferase (AST) BioAssay ELISA Kit (Human)

£990.00 96 Tests

Aspartate Aminotransferase (AST) BioAssay ELISA Kit (Human) is a sandwich enzyme immunoassay for in vitro quantitative measurement of AST in human serum, plasma, tissue homogenates, cell lysates and other biological fluids.

SKU: US023594 Categories: ,

Additional information

Detection Range

0.312-20ng/ml

Sensitivity

0.114ng/ml

Precision

Intra-Assay CV:
<10%

Inter-Assay CV:
<12%

Kit Components

*023594A: Microtiter Strips, 1×96 wells
*023594B: Standard, 2×1 vial
023594C: Standard Diluent, 1x20ml
*023594D: Detection Reagent A (green), 1x120ul
*023594E: Detection Reagent B (red), 1x120ul
023594F: Assay Diluent A, 1x12ml
023594G: Assay Diluent B, 1x12ml
023594H: TMB Substrate, 1x9ml
*023594J: Positive Control, 1.76ng/ml, 1×1 vial
023594K: Stop Solution, 1x6ml
023594L: Wash Buffer, 30X, 1x20ml

Precaution

The Stop Solution (023594K) included for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Storage and Stability

Store *023594A, *023594B, *023594D, *023594E and *023594J at -20?C. After reconstitution of *023594J, store at 4?C and use within 5 days. Store all the other components at 4?C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

Notes on 023594J

Positive Control

Intended Use

The positive control is from a human serum sample known to contain the target protein. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.

Characteristics

The positive control vial contains human AST in human serum (lyophilized powder). Note: The human based material used in this product is screened for HIV, Hepatitis A, B, C, HTLV and Syphilis.

Expected Values

1.76ng/ml

Usage

Dissolve with 150ul standard diluent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20?C. After reconstitution, store Positive Control vial at 4?C and use within 5 days.

Assay Procedure Summary

1. Prepare all reagents, samples and standards.
2. Add 100ul standard or sample to each well. Incubate 2 hours at 37?C.
3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37?C.
4. Aspirate and wash 3 times.
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37?C.
6. Aspirate and wash 5 times.
7. Add 90ul Substrate Solution. Incubate 15-25 minutes at 37?C.
8. Add 50ul Stop Solution. Read at 450nm immediately.

Source Antigen

Human

Shelf Life

6 Months